Power Station 20C+ FAQ
Can I connect the Power Station to any AC wall outlet, or does it require a dedicated circuit?
Although it is best to connect the Power Station to a dedicated circuit, a regular outlet can also be used if the total power consumption of all connected devices does not exceed the circuit fuse rating. The Power Station must be connected to the gro
Can I plug multiple Power Stations into the same power outlet?
The maximum power for each Power Station is 450W. Please use a socket that is suitable for this power rating and avoid overloading.
What Is the Power Consumption of the Power Station?
The Power Station (10X) has an energy consumption of 760Wh, and the Power Station (5X) has an energy consumption of 380Wh.
How long does it take for the Power Station to fully recharge the batteries?
The Omni Power Station takes about four hours to fully recharge the batteries.
Why can’t the battery be fully charged on the Power Station?
Upon reaching a full 100% charge, the Power 20C+ will automatically discontinue the charging process. To ensure optimal battery health, if left unused for an extended period, the Power 20C+ will self-deplete to 80% charge. Please note that it is no
Does the Power Station need an internet connection to work?
The Power Station only needs to be online if you subscribe to the PaaS (Power-as-a-Service) rental program. An internet connection is not required for regular unlocked usage.
Where should I deploy my Power Station?
Set up your Power Station on a hard, flat, and stable work surface that allows for adequate air ventilation around the unit. We recommend placing the Power Station with a minimum 10cm gap from any wall and maintaining a distance of at least 30cm betw
How to clean the Power Station and Omni 20C+ chargers?
Before cleaning your Power Station, disconnect it, remove the Portable Chargers, and power them down. Use a dry, lint-free cloth to clean off the surface of the Station and units. Avoid liquids and operating with wet hands.
Why Won’t the Power Station Charge the Units?
If your Power 20C+ units are functioning normally but some of them cannot be charged on the Power Station, it may be due to insufficient power from the outlet, which can prevent the Power Station from operating properly. Please try the following step